Your cart
There are no more items in your cart
DIGITAL MULTIMETER AUTOMATIC - CAT III 300 V / CAT II 500 V - 2000 COUNTS WITH DATA HOLD / BACKLIGHT FUNCTIONS
DVM854
Available
€19.90
Tax included
DIGITAL MULTIMETER AUTOMATIC - CAT III 300 V / CAT II 500 V - 2000 COUNTS WITH DATA HOLD / BACKLIGHT FUNCTIONS
Specification(s):
- CAT II 500 V / CAT III 300 V
- auto range
- display with backlight
- data hold function
- automatic polarity indication
- auto power-off (15 minutes)
- voltage measurements: 500 VAC and 500 VDC max.
- resistance measurements: 20 MOhm max.
- with separate test leads (incl.): [product name=TLM73]TLM73[/product]
- pollution degree 2
- IMPORTANT: THIS DEVICE DOES NOT MEASURE THE CURRENT
- [link url=http://www.velleman.eu/downloads/1/multimeter_overvoltage_installation_categories.pdf]Important safety information[/link]
Feature(s):
- environmental temperature: 23° C ± 5° C
- relative humidity: < 80 %
- accuracy: ± (a% reading + b digit)
- DC voltage (manual range): 0-200 mV / 2000 mV / 20 V / 200 V / 500 V
- basic accuracy: ± (0.5 % rdg + 2 digits )
- input impedance: 10 Mohm
- overload protection: 500 V DC or AC RMS
- AC voltage: 0-2 V / 20 V / 200 V / 500 V
- basic accuracy: ± (0.8 % rdg + 3 digits)
- input impedance: 10 Ohm
- overload protection: 500 V DC or AC RMS
- frequency range: 40-500 Hz
- display: RMS of sine wave value (average value)
- resistance: 0-200 Ohm / 2 kOhm / 20 kOhm / 200 kOhm / 2 MOhm / 20 MOhm
- basic accuracy: ± (1.0 % rdg + digits); ± (1.5 % rdg + 2 digits)
- resolution: 0.1 Ohm / 1 Ohm / 10 Ohm / 100 Ohm / 1 k Ohm / 10 k Ohm
- overload protection: 250 V DC or AC RMS
- open circuit voltage: approx. 0.5 V
- diode measurement: test forward voltage of diode
- test voltage: approx. 1.5 V
- overload protection: 250 V DC or AC RMS
- audible continuity measurement: built-in buzzer sounds of resistance is less than 50 Ohm
- test voltage: approx. 0.5 V
- display: 3 1/2 digit LCD
- battery: 1.5 V x 2 AAA R03P (incl.)
- dimensions: 125 x 75 x 25 mm
- weight: 110 g
- EAN: 5410329696108