Your cart
There are no more items in your cart
DIGITAL MULTIMETER - CAT III 600 V / CAT IV 300 V - 2000 COUNTS - AUTO SELECT - SMART RANGE
DVM101
Out-of-Stock
€49.90
Tax included
DIGITAL MULTIMETER - CAT III 600 V / CAT IV 300 V - 2000 COUNTS - AUTO SELECT - SMART RANGE
Specification(s):
- CAT. III 600 V / CAT. IV 300 V
- auto select and auto range
- DMM with automatic polarity indication and 3 ½-digit LCD display
- voltage measurements: 600 VAC and 600 VDC max.
- current measurements: DC 15 A and AC 15 A max.
- resistance measurements: 20 MOhm max.
- with separate test leads (incl.): [product name=TLM72]TLM72[/product]
- IMPORTANT: This device cannot measure positive voltage less than <2V and the manual mV setting is not possible.
- [link url=http://www.velleman.eu/downloads/1/multimeter_overvoltage_installation_categories.pdf]Important safety information[/link]
- DC voltage: 2 V / 20 V / 200 V / 600 V
- basic accuracy: ± (0.5% rdg + 2 digits) , ±(0.8% rdg + 2 digits) for 600 V range
- input impedance: 10 MOhm
- maximum input: 600 V
- AC voltage: 2 V / 20 V / 200 V / 600 V
- basic accuracy: ± (0.8% rdg + 3 digits) , ±(1.2% rdg + 3 digits) for 600 V range
- input impedance: 10 MOhm
- frequency range: 40 - 500 Hz
- maximum input: 600 V
- DC current: 20 mA / 200 mA / 2 A / 15 A
- basic accuracy: ± (1.2% rdg + 2 digits) , ±(2.0% rdg + 3 digits) for 2 A to 15 A range
- overload protection: F500 mA / 600 V - 15 A / 600 V
- AC current: 20 mA / 200 mA / 2 A / 15 A
- basic accuracy: ± (1.5% rdg + 3 digits) , ±(2.5% rdg + 5 digits) for 2 A to 15 A range
- overload protection: F500 mA / 600 V - 15 A / 600 V
- resistance: 200 Ohm / 2 kOhm / 20 kOhm / 200 kOhm / 2 MOhm / 20 MOhm
- basic accuracy: ± ( 1.0% rdg + 2 digits), ± (1.5% rdg + 3 digits) for 20 MOhm range
- overload protection: 600 VDC or rms AC
- capacitance: -
- accuracy: -
- inductance: -
- accuracy: -
- frequency: -
- basic accuracy: -
- overload protection: -
- temperature: -
- basic accuracy: -
- battery test: -
- basic accuracy: -
- overload protection: -
- audible continuity measurement: built-in buzzer sounds if resistance is less than 50 Ohm
- test voltage: approx. 0.5 V
- diode measurement: test forward voltage of diode
- test voltage: approx. 1.5 V
- overrange: yes
- continuity buzzer: yes
- transistor test: no
- diode test: yes
- low-battery indication: yes
- maximum display: 3 ½
- LCD display size:
- size: 61 x 32 mm
- digits: max. 1999
- ranging mode: auto range and manual range
- data hold: yes
- backlight: yes
- auto power-off: no
- operating environment:
- temperature: 0 °C to 40 °C (32 °F to 104 °F)
- humidity: < 80% RH
- storage environment:
- temperature: -20 °C to 60 °C (-4 °F to 140 °F)
- humidity: < 90% RH
- fuse:
- F0.5 A / 600 V 5 x 20 mm (replaceable)
- F15 A / 1000 V 5 x 20 mm (replaceable)
- test lead probe: CAT III 1000 V / CAT IV 600 V, 15 A, L = 75 cm
- dimensions: 177 x 92 x 40 mm
- weight (with battery): 320 g
- power supply: 1 x 9 V 6F22 battery (incl.)
- packing: double blister
- EAN: 5410329659288