Your cart
There are no more items in your cart
DIMMABLE LED POWER SUPPLY - CONSTANT CURRENT - 40 W - SELECTABLE OUTPUT CURRENT WITH PFC
LCM-40
Available
€67.95
Tax included
DIMMABLE LED POWER SUPPLY - CONSTANT CURRENT - 40 W - SELECTABLE OUTPUT CURRENT WITH PFC
Specification(s):
- output current selectable by DIP switches
- 180-295 VAC input only
- built-in active PFC function
- protection against: short circuit / overvoltage / over-temperature
- cooling: free air convection
- fully isolated plastic case
- Class II power unit, no FG (frame ground)
- built-in 0-10 VDC and PWM signal dimming function
- built-in 12 V / 50 mA auxiliary output
- IP20
- logarithmic or linear dimming curve selectable (meets IEC62386-207)
- temperature compensation by external NTC thermistor (not incl.)
- no-load power consumption: < 1 W
- power supply synchronization function up to 10 units
- suitable for indoor LED lighting applications
- 3 years warranty
- output:
- selectable current: 350 mA / 500 mA / 600 mA / 700 mA / 900 mA / 1050 mA
- DC voltage range: 2-100 V / 2-80 V / 2-67 V / 2-57 V / 2-45 V / 2-40 V
- rated power: 42 W
- ripple current: ± 5.0 %
- ripple & noise (max.): 700 mVp-p
- no-load output voltage (max.): 110 V / 65 V
- current accuracy: ± 5.0 %
- setup, rise time: 500 ms, 80 ms / 230 VAC at rated power
- hold up time (typ.): 16 ms / 230 VAC at rated power
- input:
- voltage range: 180-295 VAC 254-417 VDC
- frequency range: 47-63 Hz
- power factor (typ.): >= 0.975 / 230 VAC; >= 0.96 / 277 VAC at rated power
- total harmonic distortion: lower than 20 % when output load is 75 % or higher
- efficiency (typ.): 91 %
- AC current (typ.): 0.23 A / 230 VAC; 0.2 A / 277 VAC
- inrush current (typ.): cold start 20 A (twidth = 260 µs measured at 50 % Ipeak) at 230 VAC
- leakage current: < 0.5 mA / 240 VAC
- protection:
- short circuit: constant current limiting, recovers automatically after fault condition is removed
- overvoltage:
- 110-130 V
- protection type: shut down output voltage, re-power on to recover
- over-temperature: shut down output voltage, re-power on to recover
- functionality:
- auxiliary power: 12 V @ 50 mA for driving fan; tolerance ± 5 %
- temperature compensation: by external NTC thermistor (not provided with the power supply)
- dimming
- synchronization
- environment:
- operating temperature: -30 to +60 °C
- operating humidity: 20-90 % RH non-condensing
- storage: -40 to +80 °C, 10-95 % RH
- temperature coefficient: ± 0.03 %/°C (0-50 °C)
- vibration: 10-500 Hz, 2G 10 min/1cycle, period for 60 min each along X, Y, Z axes
- safety & EMC:
- safety standards: UL8750, ENEC EN61347-1, EN61347-2-13, EN62384 independent approved
- withstand voltage: input to output: 3.75 kVAC
- isolation resistance: input to output: > 100 Mohm / 500 VDC / 25 °C / 70 % RH
- EMC emission: compliance to EN55015, EN61000-3-2 Class C (>= 40 % rated power); EN61000-3-3
- EMC immunity: compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61547 light industry level (surge 2 kV), criteria A
- others:
- MTBF: min. 260,600 h; MIL-HDBK-217F (25 °C)
- dimensions (L x W x H): 123.5 x 81.5 x 23 mm
- packing: 0.24 kg; 54 pcs / 15 kg / 1.12 ft³
- EAN: 5410329586973
Tap to zoom
