SWITCHING POWER SUPPLY - SINGLE OUTPUT - 25 W - 5 V
SWITCHING POWER SUPPLY - SINGLE OUTPUT - 25 W -...

SWITCHING POWER SUPPLY - SINGLE OUTPUT - 25 W - 5 V

APV-35-5
Out-of-Stock
€24.95
Tax included
SWITCHING POWER SUPPLY - SINGLE OUTPUT - 25 W - 5 V

 
Specification(s):
  • constant voltage mode power supply
  • universal AC input / full range
  • resists 300 VAC surge input for 5 seconds
  • protections: short circuit / overload / over voltage
  • cooling by free air convection
  • compact size
  • fully isolated plastic case
  • IP30 design
  • pass LPS
  • suitable for LED lighting and moving sign applications
  • low cost, high reliability
  • 100% full load burn-in test
  • 2 years warranty
  • [b]for professional use only[/b]
  • This device must be installed by a qualified person.
Feature(s):
  • output:
  • DC voltage: 5 V
  • rated current: 5 A
  • current range: 0-3 A
  • rated power: 25 W
  • ripple & noise (max): 120 mVp-p
  • voltage tolerance: +/- 5.0%
  • line regulation: +/- 1.0%
  • load regulation: +/- 2.0%
  • setup, rise time: 1500 ms, 40 ms / 230 VAC 1500 ms, 40 ms / 115 VAC at full load
  • hold-up time (typ.): 20 ms / 230 VAC 12 ms / 115 VAC at full load
  • input:
  • voltage range: 90-264 VAC 127-370 VDC
  • frequency range: 47-63 Hz
  • efficiency (typ.): 76.5 %
  • AC current (typ.): 0.5 A / 230 VAC 0.75 A / 115 VAC
  • inrush current (max.): cold start 45 A (twidth = 440 µs measured at 50% lpeak) at 230 VAC
  • leakage current: 0.25 mA / 240 VAC
  • protection:
  • overload:
  • 110-160% rated output power
  • protection type: hiccup mode, recovers automatically after fault condition is removed
  • overvoltage:
  • 5.75 - 6.95 V
  • protection type: shut down output voltage, re-power on to recover
  • environment:
  • working temperature: -30 °C to +70 °C
  • working humidity: 20 - 90% RH non-condensing
  • storage temperature, humidity: -40°C to +80 °C, 10 to 95% RH
  • temperature coefficient: +/- 0.03 % / °C (0 to 50 °C)
  • vibration: 10 - 500 Hz, 2 G 10 min. / 1 cycle, period for 60 min. each along X, Y, Z axes
  • safety & EMC:
  • safety standards: UL8750, CSA-C22.2 No. 250.0-13 approved; design refer to EN60950-1
  • withstand voltage: input-output: 3000 VAC
  • solation resistance: input-output: > 100 MOhm; / 500 VDC / 25 °C / 70 % RH
  • EMC emission: compliance to EN55022, EN61000-3-2 Class A, EN61000-3-3
  • EMC immunity: compliance to EN55024, EN61000-4-2,3,4,5,6,8,11; light industry level (surge 2KV), criteria A
  • other:
  • MTBF: 692.800 hrs min. MIL-HDBK-217F (25°C)
  • dimensions: 84 x 57 x 29.5 mm


  • EAN: 5410329656546
Product added to wishlist
Product added to compare.

"By continuing to browse, you declare that you have read our privacy policy and you accept the deposit of third-party cookies intended for you offer videos, share buttons, content feeds from social platforms ".